Exendis Impulse Manuál s instrukcemi stáhnout pdf (Strana 15)

Navix

2012-10

Page 13

7. Mount the armrest with joystick (paragraph 2.5).

8. Mount the footrests (paragraph 2.6).

9. Fold the footplates of the footrests down.

2.4 Mounting or Fold away armrest

CAUTION: Risk of clamping – Keep fingers, buckles and clothes away from the

attachment points of the armrest or armpad.

The armrests can be fold away so the patient can be moved sideways.

To mount the armrests on the electric wheelchair:

1. Turn the armrest to the front around the pivot point



2. Pull on lever



3. Mount the tube hood



in hole



To fold away the armrests from the electric wheelchair:

1. Pull on lever



2. Turn the armrest backwards around the pivot point



until it stops.

2.5 Adjusting of the armrests

WARNING:

Risk of tipping over - Check that the armpads are at the same height

on each side.

The armpads are adjustable in 7 different heights.

Height armpad

Position tube Ⓒ

ⒸⒸ

Ⓒ

260 mm Hole 7

275 mm Hole 6

290 mm Hole 5

305 mm Hole 4

320 mm Hole 3

335 mm Hole 2

350 mm Hole 1

Table 3: Armrest height

1. Loosen the locking mechanism slightly by turning the star knob

Ⓐ

anti-clockwise.

2. Pull on the locking pin

Ⓐ

3. Move the square tubes

Ⓑ

and

Ⓒ

over each other to adjust the armpad height. Do this

at the same time when pulling on the locking pin

Ⓐ

4. Loosen the locking pin

Ⓐ

5. Check that the locking pin

Ⓐ

is securely fixed.

6. Retighten the locking mechanism by turning the star knob

Ⓐ

clockwise to reduce the

play of the armrest.

These instructions can also used for removing the armpads.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 39 40

Komentáře k této Příručce

Žádné komentáře

Exendis Impulse Manuál s instrukcemi Strana 15

Komentáře k této Příručce

Související produkty a manuály pro Sporáky Exendis Impulse